Close this search box.

Maple Injected Bacon3

I have been making my own back bacon (Americans call it Canadian bacon) for a while now. It has been great and I really enjoy it.

However, I always wanted to get a real maple taste in my bacon and just wasn’t able to manage it. There was two problems. First, the maple taste in commercial bacon isn’t really maple. It is a flavour injected into the bacon to approximate maple flavour. I wanted a real maple flavour.

Second, the ways I tried to get maple flavour just didn’t add enough. When you make bacon, you have to cure pork by putting a dry cure on it or by immersing it in a curing brine. I tried putting maple in both dry cures and curing brines. No matter how much I put in, it never really picked up a maple flavour. This time I tried injecting a maple/brine mixture before brining the pork.

I purchased a couple of boneless 1 kilgoram (2 pound) pork loin roasts to make my bacon.

First I made a curing brine. My curing brine is based on a recipe from Pops on the Smoking Meat Forums. His brine recipe can be found at this link:

Pop’s Curing Brine

I modified it to meet my goal of making a maple bacon. Here is my recipe to make 3 litres (3/4 gallon) of brine which is the amount I needed to cover the pork loins I had. When brining pork, you need enough brine to cover the meat. It is critical you get the right amount of Prague Powder #1 (also known as I nstacure #1 or pink salt) to the amount of water. Use 15 ml (1 tablespoon) Prague Powder per 4 litres (1 US gallon). If you add too much curing agent, it can make you sick. Too little and you run the risk of toxin creating bacteria growing in your bacon.

I used:
3 litres (3/4 US gallon) water
125 ml (1/2 cup) kosher salt
175 ml (2/3 cup) sugar
90 ml (1/3 cup plus 1 tablespoon) brown sugar
90 ml (1/3 cup plus 1 tablespoon) maple syrup
11 ml (2 1/2 teaspoon) Prague Powder #1

Mix all until dissolved.

I took 125 ml (1/2 cup) of the brine and added 60 ml (1/4 cup maple syrup to it and injected it in several places in the pork loins I had purchased. Then I put the pork in a stainless steel pot and poured the brine over it. Put a plate or a plastic bag full of brine on top of the pork to keep it submerged. Cover the pot and put it in the fridge for two weeks. I turn it every few days.

Maple Injected Bacon

After two weeks, take the pork out of the brine. Rinse it and dry it with a paper towel. Then I put it in my Bradley electric smoker set at 140 F with no smoke for 2 hours. This is to dry the surface so the smoke will adhere well.

Maple Injected Bacon1

I wanted a strong smoke flavour so I decided to cold smoke the bacon for a few hours. I put the strainer in the bottom of the pot of my WSM Mini and then put a wire ring on it. I put a foil covered ceramic plate on the ring and filled it with ice to keep the temperature down. This isn’t really necessary for doing the bacon but I was going to smoke some cheese at the same time and that requires cool smoking temperatures. I used my Amaze-N Smoker with a mix of pecan and apple sawdust and put it on the coal tray of the smoker. I put the pot on it, covered the smoker and let it go for 3 hours. You can see the cheese I did at the same time.

Maple Injected Bacon2

I took the bacon out of the cold smoker and put it in the Bradley electric smoker at a temperature of 150 F over pecan smoke. I increased the temperature to 170 F after an hour. I increased it again to 190 F after another hour. I increased it to 200 F after another hour and continued to smoke until the internal temperature was 150 F.

I let the bacon sit in the fridge for 2 days for the flavours to blend. Then, it is sliced. I’m sorry, I forgot to take a picture when I sliced it two days later.

The Verdict: Eureka! This has a real nice taste of maple. Not the candy maple taste of commercial products, a real nice mellow maple flavour. This is now my favourite recipe for back bacon.

The Old Fat Guy


Get our best recipes & expert tips right into your inbox!

Join over 10k subscribers

By submitting above, you agree to our privacy policy.
Share this post:

2 Responses

  1. Interesting recipe, I have been making maple bacon using using rindless belly and a lot less liquid and shoving it in a ziplock. I was wondering if I could inject all the brine or do I still need to have it in a liquid to prevent bacteria. I recommend dropping the prague, major cause of bowel cancer (my wife is a food scientist and Ive done a tonne of research into this), you dont need it for hom with short shelf life.

    1. This is one of my earlier recipes. If you check some of my later posts, I now use a dry cure for my bacon. When I want a maple taste, I inject maple syrup into the pork and then dry cure. I think it gives a better texture.

      However, some prefer wet cured and I have good results with this wet cure. To answer your questions, I would not recommend injecting all the brine. The theory of all kind of curing is to get an equilibrium of the cure ingredients through the meat. Injecting helps speed it along but you still need a contact of all the surface with the brine to allow the cure to go to all parts of the pork.

      I do understand the studies on using nitrites and the health risks. However, I disagree with you on leaving it out of making bacon. The problem is that bacteria can form at stages other than storage. First, if you are brining for a long period of time as required, there is some risk of bacterial growth even in the cold bringing process due to the extended soaking times. Second, you either cold smoke or smoke for a long time at low temperatures. This puts the meat into the temperature danger zone for an extended period. The salt will give some protection but not enough in my opinion. The risk of a toxin producing bacteria is just too great. These toxins are not destroyed by cooking. Nitrites help inhibit this process.

      The next reason for using nitrites is the taste quality of the product. If you do not use nitrites, you are making smoked pork, not bacon. It will be very tasty but it won’t have the texture or flavour of a nitrite cured bacon.

      I am sure you are happy with the way you do it but it I feel there are risks that I don’t want to take and the result is not bacon in my tastes. I am not trying to convert you, I am just giving you my opinion from my research.

Leave a Reply

Your email address will not be published. Required fields are marked *